M-650
DUAL PHOTO CELL EQUIPPED (FIBER OPTICS)
CODING MATERIAL SIZE: MIN. 45 MM W X 70 MM L. MAX.240 MM W X 300 MM L
THICKNESS: 0.07 MM - 2.00 MM
MACHINE DIMENSIONS: 325 MM H X 390 MM W X 460 MM L. ABOUT 24 KGS
 
CODING SPEED : UP T0140 PCS, PER MINUTE (POST CARD SIZE OF 150 MM L)
PRINTING TYPES : SINCE HOT ROLL INK IS HEATED WHEN IN USE, (SO AS TYPES) COPPER BRONZE METAL TYPES (R AND T) ARE USED, (NO RUBBER TYPES ARE USED)
TYPES ARE DIFFERENT FROM THOSE FOR M-4701570 AND 100 SERIES).
TYPES (3 MM OR 4MM) ARE SEPARATELY AVAILABLE, AND NOTAPART OF MAIN MACHINE.
PRINTING TYPE HOLDER : R DIRECTION AND T DIRECTION TYPE HOLDERS (HUBS).
HUBS (50 MM O.D.) ARE DIFFERENT FROM THOSE FOR M-4701570 AND 100 SERIES. (38.1 MM O.D.) HUBS ARE SEPARATELY AVAILABLE, AND NOTA PART OF MAIN MACHINE.
INKS : MORICO DRY INK ROLL IS USED. (40 MM O.D. X 35 MM L) WAX CONDITION UNDER NORMAL TEMPERATURE
#927B IS FOR LOW TEMPERATURE USE (140°C) #927 IS FOR MEDIUM TEMPERATURE USE (155°C) #928 IS FOR HIGH TEMPERATURE USE (170°C) AVAILABLE COLOURS: BLACK (STANDARD), WHITE, RED.
INK ROLLS ARE SEPARATELY AVAILABLE, AND NOTA PART OF MAIN MACHINE.
ELECTRICITY : 100/110 V SINGLE PHASE 60 WATTS (50 / 60 Hz) STANDARD 200/220 V SINGLE PHASE 60 WATTS (50/ 60 Hz) BY REQUEST
HEAT SECTION : AS MODEL M-650 USES HEAT FOR HOT ROLL. DRY PRINTER CARTRIDGE SECTION IS INCORPORATED. IT IS SAFE, BUT NORMAL CAUTION IS NEEDED FOR HOT SECTION. IT TAKES 20-30 MINUTES TO WARM UP AT BEGINNING.
SPARE BACK UP : ALL CONSUMABLE ITEMS/INVENTORY HAVE BEEN STOCKED FOR IMMEDIATE
RELEASE BY FACTORY WITH STRONG BACK UP SYSTEM THROUGH DISTRIBUTOR CHANNEL.